铸铁平台平板的安装维护注意事项
时间：2015/12/26 11:14:01
浏览量：513
1、铸铁平台不用时要及时将工作面洗净，然后涂上一层防锈油，并用防锈纸盖上，用铸铁平板的外包装将铸铁平板盖好，以防止平时不注意造成对铸铁平板工作面的损伤。
2、铸铁平台应安装在通风、干燥的环境中，并远离热源、有腐蚀的气体、有腐蚀的液体。
3、铸铁平台按国家标准实行定期周检，检定周期根据具体情况可为6-12个月。
4、为了防止铸铁平板发生的变形，在吊装铸铁平板时，要用四根同样长度的钢丝绳同时挂住铸铁平板上得四个起重孔，将铸铁平板平稳吊装在运输工具上。
5、将铸铁平台支承点垫好、垫平，保证每个支撑点受力均匀，保证整个铸铁平板平稳。
6、铸铁平台安装时将铸铁平板的各个支撑点用调整垫铁垫好、垫实，由专业技术人员将铸铁平板调整至合格精度。
7、铸铁平台使用时要轻拿轻放工件，不要在铸铁平板上挪动比较粗糙的工件，以免对铸铁平板工作面造成磕碰、划伤等损坏。
8、为了防止铸铁平板整体变形，使用完毕后，要将工件从铸铁平板上拿下来，避免工件长时间对铸铁平板重压造成铸铁平板的变形。
1. When the cast iron platform is not in use, the working surface should be washed in time, then coated with a layer of anti-rust oil, and covered with anti-rust paper. Cover the cast iron plate with the outer package of the cast iron plate to prevent the cast iron from being inadvertently caused by the cast iron plate. Damage to the flat working surface.
2. The cast iron platform should be installed in a ventilated, dry environment and away from heat sources, corrosive gases, and corrosive liquids.
3. The cast iron platform shall be subject to regular weekly inspection according to national standards. The verification period may be 6-12 months depending on the specific conditions.
4. In order to prevent the deformation of the cast iron plate, when lifting the cast iron plate, four lifting holes on the cast iron plate are used to hang the four cast iron plates at the same time, and the cast iron plate is smoothly hoisted on the transportation tool.
5. The cast iron platform support points are well padded and leveled to ensure uniform force at each support point, ensuring smoothness of the entire cast iron plate.
6. When the cast iron platform is installed, the support points of the cast iron plate are adjusted and lapped with the adjusting horn, and the cast iron plate is adjusted to the qualified precision by professional technicians.
7. When using the cast iron platform, gently handle the workpiece. Do not move the rough workpiece on the cast iron plate to avoid bumping, scratching and other damage to the cast iron plate working surface.
8. In order to prevent the overall deformation of the cast iron plate, after use, the workpiece should be taken off the cast iron plate to avoid deformation of the cast iron plate caused by heavy workpiece pressing on the cast iron plate for a long time.
Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered
address: jiaohe development zone, botou city, hebei province
Fax
number: 0317-8031093
Contact
information: 15369812793 (WeChat with the same number) liansheng chu
Postcode:
062151
Enterprise
email:
1358827475@qq.com
Account
Opening Bank: Botou Branch of Bank of China
Account
number: 100399943203
Agricultural
bank account number: 6228481739059615270
http://zhuoyuanjixie.com